Answer Or Reject A Voice Call; Call Waiting; Options During A Voice Call - Nokia 6233 User Manual

C a l l f u n c t i o n s
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should
not rely solely upon voice
dialing in all circumstances.
1. In the standby mode, press and
hold the right selection key. A
short tone is played, and
now is displayed.
If you are using a compatible
headset with the headset key,
press and hold the headset key to
start the voice dialing.
2. Say the voice command clearly. If
the voice recognition is
successful, a list with matches is
shown. The phone plays the voice
command of the match on the
top of the list. After about
1.5 seconds, the phone dials the
number; or if the result is not the
correct one, scroll to another
entry, and select to dial the entry.
Using voice commands to carry
out a selected phone function is
similar to voice dialing. See
commands in "My shortcuts"
p. 38.
■ Answer or reject a voice
call
To answer a call, press the call key.
12
Speak
Voice
Copyright © 2006 Nokia. All rights reserved.
To mute the ringing tone before you
answer the call, select Silence.
To end the call or reject a call, press
the end key.

Call waiting

During a call, to answer the waiting
call, press the call key. The first call is
put on hold. To end the active call,
press the end key.
To activate the Call waiting
see "Call" p. 44.
■ Options during a voice
call
Many of the options that you use
during a call are network services.
For availability, contact your
network operator or service provider.
Call options are Mute
Contacts, Menu, Lock
Record, Loudspeaker, or Handset.
Network services options are
Answer, Reject, Hold
call, Add to conference,
all calls, and the following:
Send DTMF — to send tone strings.
Swap — to switch between the
active call and the call on hold.
Transfer — to connect a call on hold
to an active call and disconnect
yourself.
function,
or Unmute,
keypad,
or Unhold, New
End call, End