Restore Factory Settings; Alarm Clock (Menu 6); When The Alarm Time Expires; Gallery (Menu 7) - Nokia 6108 User Manual

• Access codes to change the
security code, PIN code, PIN2
code or barring password. Codes
can only include numbers from 0
to 9.

Restore factory settings

To reset some of the menu settings
to their original values, press Menu,
and select Settings
factory settings. Key in the security
code and press OK.
■ Alarm clock
(Menu 6)
The alarm clock uses
the time format set for the clock.
Even when the phone is switched
off, the previously set alarm will still
work providing that there is enough
power in the battery.
Press Menu, and select
• Select Alarm time, enter the
alarm time and press OK.
To change the alarm time, select
On.
• Select Alarm tone
default alarm tone.
and Restore
Alarm clock.
and select the
M e n u f u n c t i o n s

When the alarm time expires

The phone will sound an alert tone,
and flash Alarm! and the current
time on the display.
Press Stop to stop the alarm. If you
let the phone continue to sound the
alarm for a minute or press Snooze,
the alarm stops for about ten
minutes and then resumes.
If the alarm time is reached while
the phone is switched off, the phone
switches itself on and starts
sounding the alarm tone. If you press
Stop, the phone asks whether you
want to activate the phone for calls,
Switch the phone
switch off the phone or
and receive calls.
Note: Do not press
when wireless phone use is
prohibited or when it may
cause interference or
danger.
■ Gallery
(Menu 7)
Note: Your
phone must be switched on
to use this function. Do not
switch the phone on when
wireless phone use is
prohibited or when it may
cause interference or
danger.
on?. Press No to
Yes to make
Yes
57