Pin Code; Pin2 Code - Nokia 3200 User Manual

PIN code

Before you can change your PIN code, you need to enable PIN code request. See
"PIN code request" on page 23.
1 From the menus, select Settings > Security settings > Access codes >
Change PIN code.
After a brief pause, you are prompted to enter the current PIN code.
2 Enter the PIN code and select OK.
You are prompted to enter the new PIN code.
3 Enter the new PIN code and select OK.
You are prompted to reenter the new PIN code for verification.
4 Enter the new PIN code and select OK.
A message appears in the display confirming your PIN code has been changed.

PIN2 Code

The PIN2 code is required for features such as Fixed dialing. If you enter an
incorrect PIN2 code three times in succession, the PIN2 code is blocked and you
will have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your service provider.
Use this procedure to change your PIN2 code.
1 From the menus, select Settings > Security settings > Access codes >
Change PIN2 code.
You are prompted to enter the current PIN2 code.
2 Enter the current PIN2 code and select OK.
You are prompted to enter the new PIN2 code.
3 Enter the new PIN2 code and select OK.
You are asked to verify the new PIN2 code by entering it again.
4 Enter the new PIN2 code and select OK.
A message appears in the display confirming you have changed the PIN2 code.
Personal unblocking key (PUK) codes
PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and
PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2
codes must be obtained from your service provider.
If you enter an incorrect PUK or PUK2 code 10 times in succession, SIM rejected
appears in the display and the SIM card can no longer be used. You must contact
your service provider for a new SIM card.
28 Copyright © 2004 Nokia