Using Epg (Electronic Program Guide); Password In Parental Control; Software Update - TCL L49P3CFS Operation Manual

product.
1. Press on the remote control and select PVR.
2. Press OK/► to enter. It starts to record
automatically..
3. Press button on the remote control and use
▲/▼/◄/► to adjust the recording duration.
4. Press OK to stop recording manually, the recorded
file will be saved. In normal operation, the recording
will stop automatically when the recording duration
expires.
5. In recording, the PVR mini panel will also show on
the screen to indicate the recording progress.
6. To watch the recorded program, exit PVR mode first
and go to > TV > Media > All. Select the folder
PVR, then select the related record file. Press OK
to play. (It is the same if you record a digital radio
program).
Notes:
- This feature is available only for digital non-
encrypted channels. Even when CICAM (CI or CI+)
is inserted, this feature is not available on encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged, or
the file cannot be decoded.
- Do not disconnect the USB drive when the system
is reading a file or transmitting data, otherwise the
system or the drive may be damaged.

Using EPG (Electronic Program Guide)

EPG is an on-screen guide that displays scheduled
digital TV programs. You can navigate, select and view
programs.
1. Press GUIDE on the remote control, the Program
Guide menu will appear, which allows you to get
information about the current or next program
playing on each channel. Navigate through the
different programs using the ▲/▼/◄/► buttons on
the remote control.
2. Use the related buttons shown at the bottom of the
screen to view EPG.
- Page -/+: Press the red or green button to toggle
among the different program guide pages.
- Filter: Program guide filter for digital TV programs.
Using more of your TV
• Press the blue button to display the type list of
the program.
• Navigate through the different types using the
▲/▼/◄/► buttons on the remote control.
• Select one or more types, which you want to
highlight from the type list, press OK to select or
deselect. A checkmark will appear to the right of
the type when selected. When you select a type,
all its subtypes (if available) will be selected
accordingly.
• Also, you can select some desired subtypes (if
available) without selecting any type first.
• Press the blue button to exit the type list.
• After filtering, all your desired digital TV
programs will be highlighted.
- Detail: Press the yellow button to bring out more
details about the selected program in the case that
the details are not shown completely.
- Add schedule: Press
your schedule list.
3. Press GUIDE or EXIT to exit EPG.

Password in Parental Control

- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.

Software update

Note: Do not switch off or unplug the TV until the
upgrade is completed.
Press on the remote control, select Support >
Software update and press OK/► to enter. You
have the following options to update the software.
- By USB: Enables you to install a new version
software from a USB stick. Insert the USB stick
in which a new version software is stored into a
USB socket of the set. Select By USB and press
OK/► to enter. Follow the on-screen instructions
to complete the process.
- By network: Enables you to download and install
the latest version software from the Internet.
Make sure to set up a wired or wireless network
connection first then select By network and press
OK/► to enter. Follow the on-screen instructions
to complete the process.
Note: Keep successful network connection during
upgrade.
- By channel: Enables you to install the latest
version software if available from the broadcast.
Select By channel and press OK/► to enter.
Follow the on-screen instructions to complete the
process.
13
to add a schedule into