NETGEAR FM114P Installation Manual page 8

Cable/dsl prosafe wireless firewall with print server
Hide thumbs Also See for FM114P:
Table of Contents

Advertisement

Check the setup
The Test light turns on for a few seconds and then goes off.
Note: If the Test light remains on for more than one minute, go to Troubleshooting
on page 13.
The Power and Internet Link lights should be lit.
The WLAN light should be lit.
If your computer is on, the Local Link light should be on for the port number that your
computer is connected to.
Note: If the port connection is a 100 Mbps connection, the 100 light should be on.
If either the Power, Internet Link, or Local port Link light isn't lit, go to Troubleshooting on
page 13.
7

Advertisement

Table of Contents
loading

Table of Contents