Subscribe to Our Youtube Channel
Summary of Contents for ELIT PTC-22
- Page 1 WALL MOUNTED HEATER PTC-22 OPERATING INSTRUCTIONS Please carefully read this instruction manual prior to use.
- Page 2 IMPORTANT SAFEGUARDS Thank you for buying our product. Please read this instruction carefully before operating the heater. Keep this operating instruction for future reference. 1. The heater should be hung on the wall and make the wind outlet down or be placed on flat appliance. You must not place it precipitantly or tipsily.
- Page 3 INSTALLATION OF THE APPLIANCE Get two holes on the wall 2 meters above the floor and near the corner more 20 mm, be sure to make the diameter just as same as the expanding pipe. Fix two screws on the expanding pipe, keep the tips of the screws out for 10mm, and hang up the machine after the screws are fixed enough.
- Page 4 CONTROL PANEL BUTTON DESCRIPTION NOTE: It is normal when heaters are turned on for the first time or when they are turned on after having not been used for a long period, to emit some smell and fumes. This will disappear when the heater has been on a short while.
- Page 5 OTHER FUNCTIONS DESCRIPTION When the thermal protection device next to PTC shuts off the appliance, all functions stop working. CLEANING AND MAINTENANCE Before cleaning always remove the plug from the electrical socket. CLEAN THE AIR INLET / OUTLET GRILLES FREQUENTLY Never use abrasive powders or solvents.
Need help?
Do you have a question about the PTC-22 and is the answer not in the manual?
Questions and answers