Coleman Tent 9805-130 Assembly Manual

POLE ASSEMBLY PART
Main Tent Pole (1) Silver)
Part No. 9805-1001
Foot Pole (1)_ Gold Tips
Part No. 9805-1002
1
Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with door facing
desired direction. (illus. 1)
– For best results in windy conditions position
end of tent into the wind.
– Stake down tent corners using the stake loops.
Keep the floor taut. Unzip door. (illus. 2)
– Assemble Frame Poles by interlocking
shock-corded sections. This will make one long
and one short curved pole.
– Insert the longer pole through the pole sleeve
located in the middle of the tent and the shorter
pole into the sleeve at the foot of the tent (illus. 1)
2
Connect Frame to Tent
– Insert one Pole Tip into grommet on stake loop
located at middle edges of the tent.(illus. 3).
– Go to opposite end of pole and
gradually apply pressure to the
pole forming an arch until you
are able to insert the pole tip
into the grommet.
(illus. 3 & 4)
blaze solo
part number 9805-130
Rainfly
Part No. 9805-1051
Zipper Door
illus. 1
illus.3
Insert Pole Tip
into grommet
Pole Sleeve
illus. 2
Tent stake
through Loop
illus.4
Tent completely set up
and staked out.