Mounting the plasma monitor using mount fittings B
The speakers are marked R for use on the right side and L for use on the left side.
At the time of mounting, check for the letter R or L appearing on the label at the back of the speaker, and on the
Attach the cushions to the sides of the speakers in the
positions indicated on the diagram.
Partially tighten the included M8 X 18 screws in the
screw holes on the top of the monitor.
Check the speakers' labels ("L" and "R"), and place them as
shown on the diagram below.
Mount the 42R UP mount fitting to the top of speaker R, the
42R BOTTOM mount fitting to the bottom of speaker R, the
42L UP mount fitting to the top of speaker L, the 42L
BOTTOM mount fitting to the bottom of speaker L.
Mount by inserting the guide pins on the speakers into the
holes in the mount fittings then fastening using the included
M4 x 10 screws (two each).
Catch the hooks at the top of the speaker on the partially
tightened screws, then line up the screw hole in the bottom
of the monitor with the hole in the speaker's hook and
partially tighten using the included M4 x 18 screws (two