Appendix - NEC MultiSync LCD1880SX User Manual

Appendix

If you need detailed information about the controls, please use the advanced menu.
<How to use the advanced menu>
Turn off your monitor.
•
Turn on your monitor by pushing the "POWER" and "SELECT" button at the same time for at least one
•
second simultaneously.
You will see the Advanced menu.
•
This menu is larger than the normal OSM.
<How to exit the advanced menu>
• Turn off and restart your monitor in the normal way.
To make an adjustment, ensure that the tag is highlighted, then press "SELECT."
To move to another tag, press "EXIT," then press "
Tag1 Brightness
Contrast
Auto Contrast
(Analog input only)
Auto Brightness
(Analog input only)
Tag2 R-H.position
(Analog input only)
G-H.position
(Analog input only)
B-H.position
(Analog input only)
R-SHRPNESS
(Analog input only)
G- SHRPNESS
(Analog input only)
B- SHRPNESS
(Analog input only)
Tag3 Signal
(Analog input only)
Auto SW
(Analog input only)
Determines the automatic adjustment level. Any menu option provides an automatic adjustment more
items than those provided by the options listed above it but requires a longer adjustment time.
OFF
SIMPLE
FULL
DETAIL
*1: Automatically adjusts the monitor to optimal settings upon initial setup at 800 x 600 or higher resolution.
*2: Black level, Peaking, RGB sharpness, RGB delay and RGB position.
Adjusts the overall image and screen background brightness. Press "+" or "-"
to adjust.
Adjusts the image brightness and contrast in relation to the background. Press
"+" or "-" to adjust.
Adjusts the image displayed for non-standard video inputs. Press "SELECT" to
adjust. Any adjustement requires the image to have white portions.
This function adjusts the brightness automaticaly for the best CONTRAST and
BRIGHTNESS setting based on the white display area.
Adjusts the position of the red component of the image. Press "+" or "-" to
adjust.
Adjusts the position of the green component of the image. Press "+" or "-" to
adjust.
Adjusts the position of the blue component of the image. Press "+" or "-" to
adjust.
Adjusts the sharpness of the red component of the image. Press "+" or "-" to
adjust.
Adjusts the sharpness of the green component of the image. Press "+" or "-" to
adjust.
Adjusts the sharpness of the blue component of the image. Press "+" or "-" to
adjust.
Determines the automatic adjustment level activated when the system detects a
change in the signal. The choices are "OFF", "SIMPLE" and "FULL". Press "+"
or "-" to select.
Determines the automatic adjustment level for Auto Adjust performed on OSM.
The choices are "SIMPLE", "FULL" and "DETAIL". Press "+" or "-" to select.
"Size" "Fine" "Position" Contrast
O*1
O
O
O
" or " " to highlight another tag.
"Detail Items (long cable capability)*2"
X X
X X
O X
O O
16
Time
1.5 seconds
1.5 seconds
2 seconds
10 to 20 seconds