Table of Contents
Advertisement
3.4
Starting and Exiting MeetingPoint
MeetingPoint's Start procedure varies, depending on whether or not your system
will be in a videoconferencing network managed by a Mitel Networks 5700 Voice
First Application.
NOTE MeetingPoint disables your computer's screensaver.
System Managed by 5700 VFA (MXM)
"
To start MeetingPoint
1.
In the Windows Desktop, click the VCON MeetingPoint icon.
-or-
Press the ViGO Smart button on the top of the device.
The Login dialog box appears.
2.
Enter 5700 VFA (MXM) login information as follows (consult with your
system administrator):
MXM Login
Name
Password/
Verify Password
Gatekeeper
Mitel Networks 5750 DV Installation and Setup Guide
Initial Login to 5700 VFA (MXM)
The name of your computer as listed in the MXM
database and the 5700 VFA (MXM) Administrator.
Password required to log in. The first time you register,
you must type it twice for verification. If you do not
supply this password, the login request is rejected.
The IP address of the 5700 VFA (MXM). If you do not
know it, ask your system administrator (when entering
an IP address, do not enter leading zeroes).
Chapter 3 MeetingPoint Setup
®
3–11
Advertisement
Table of Contents
