McQuay MDS030A Manual page 40

Installation of MCM-T Series Indoor Unit
To Check the Accessories are Ready
To Install the Indoor Unit
There are two types of installation. Make sure the hook can bear the unit weight in ceiling mounting; a slope
for the drainage direction is a must both for ceiling/floor standing mounting; ensure there is enough space for
maintenance around the unit.
There are two type of installation: vertical floor standing or horizontal ceiling mounting:
ceiling mounting
ceiling mounting
≥400mm
≥400mm
PULL
PULL
If the indoor unit is semi-concealed mounted in ceiling, reserve holes in ceiling to ensure enough space for
mounting and maintenance, as shown below:
Horizontal Ceiling Mounted
1. To remove the air return grill, frame, side panel and suspending panel as shown as below:
≥300mm
ceiling mounting
≥300mm
ceiling mounting
PULL PULL PULL
PULL PULL PULL
floor standing mounting
floor standing mounting
10mm
machine top panel
ceiling
10mm
machine top panel
10mm
ceiling
panle side
suspending panel
frame
air return grill
floor standing mounting
floor standing mounting
≤250mm
≤250mm
≥1000mm
≥1000mm
10mm
page 39