Table of Contents
Advertisement
space between the screw head
into place.
Warning: When mounting near a window, drilling too close
it to shatter, and cause injury. The
you
r screw is beyond the glass before drilling.
Ins
tall the Magnetic Contact
1
Using the double-sided tape provided,
contact to the part of the object that moves.
You can also mount the contact more securely using the
screws in the hardware kit and the drilling template
provided later in this guide. Use the Wall Mounting Drilling
template at the end of this guide to assist you.
2
Make sure the magnetic contact aligns with the top of the
sensor on either the left or right side.
Wall Mount Drilling
Mounting tools: Screwdriver, electric drill, or awl. On
½-inch-deep pilot holes with a drill bit slightly smalle
camera to the surface. When mounting a camera on soft
the material slightly smaller than the plastic
The illustrations are drawn to a one
required to mount the units.
and the object. Mount the sensor onto the screws and slide down to lock
window extends deeper into the frame th
attach the magnetic
Templates
r than the camera mounting screws before securing the
anchors included in the hardware mounting kit.
-to-one scale, which means that
Drill holes in
these positions
Wireless Motion Sensor Camera
(Day) drilling template
to the glass could break the glass, possibly cause
an can be seen; therefore, ensure
hard surfaces, Motorola re
surfaces like sheetrock, use an awl to punch holes in
they provide the exact dimensions
1.11 in
6
commends that you pre-drill
Mounting hole
Mounting hole
Advertisement
Table of Contents
