Motorola dct6412 User Manual page 36

Connecting an A/V Receiver, TV, and VCR
Connect an RF coaxial cable to the cable wall outlet and the
1
connector on the DCT*.
CABLE IN
Connect a stereo audio cable to the
2
on the DCT* and the
Connect a video cable to the
3
the
CABLE
Connect a stereo audio cable to the
4
connectors on the A/V receiver and the
connectors on the stereo VCR.
Connect a stereo audio cable to the
5
connectors on the stereo VCR and the
connectors on the A/V receiver.
Connect a video cable to the
6
VCR and the
Connect a video cable to the
7
VCR and the
Connect a video cable to the
8
TV and the
receiver.
If your equipment supports it:
The optical (
used in place of the stereo audio outputs (
cases these outputs offer a higher level of audio quality, including
support for 5.1 surround sound.
S-video connections may be used in place of the standard RCA
video connections. In most cases, S-video offers a higher level of
standard definition video quality than RCA video.
The video connection method does not support HD video. For more
information, see "Connecting your DCT* to an HDTV – Video Only" on
page 18.
INPUT R
/ connector on the A/V receiver.
TV VIDEO
VIDEO VCR OUT
VIDEO VCR IN
/
TV MONITOR OUTPUT
OPTICAL SPDIF
DCT6400 Series User Guide
AUDIO OUT R
and connectors on the A/V receiver.
L
connector on the DCT* and
VIDEO OUT
VCR AUDIO OUT R
INPUT AUDIO R
OUTPUT AUDIO OUT R
VCR AUDIO IN R
connector on the stereo
INPUT VIDEO
connector on the A/V receiver.
OUTPUT VIDEO
connector on the A/V receiver.
connector on the stereo
INPUT VIDEO
video connector on the A/V
) or coaxial (
SPDIF
29
and connectors
L
and
L
and
and
and
connector on the stereo
) audio outputs may be
and L). In most
AUDIO R
L
L
L