Motorola dct6412 User Manual page 30

Connecting an A/V Receiver – Audio Only
There are three options available for audio connections to your A/V
receiver:
Optical (
OPTICAL SPDIF
Coaxial (
SPDIF
Stereo audio (
If your equipment supports it, the optical (
( ) audio outputs may be used in place of the stereo audio outputs
SPDIF
( and L). In most cases these outputs offer a higher level of audio
AUDIO R
quality, including support for 5.1 surround sound.
Optical SPDIF: Connect the optical SPDIF cable to the
connector on the DCT* and the
SPDIF
receiver.
SPDIF: Connect the digital audio cable to the SPDIF connector on
the DCT* and the
receiver.
Stereo audio: Connect the stereo audio cable to the
connectors on the DCT* and the
connectors on the A/V receiver.
For information on configuring your DCT* settings, see "Optimizing Your
DCT* for High Definition TV."
)
)
and )
L
AUDIO R
DIGITAL INPUT COAX
DCT6400 Series User Guide
OPTICAL SPDIF
OPTICAL
connector on the A/V
and
AUDIO LEFT
23
) or coaxial
OPTICAL
connector on the A/V
and
AUDIO R
AUDIO RIGHT
L