Answering Machine - Motorola L402C User Manual

Poor audio quality
The corded base is too close to electrical appliances,
reinforced concrete walls or metal doorframes - move
the corded base away from any electrical appliances.
No ring tone
• The ring tone is deactivated.
• Increase the volume.
Caller ID service does not work
Check your subscription with your network operator.
Phonebook
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free memory.
Display
No display
• Try recharging or replacing the battery pack.
• Reset the corded base. Unplug the unit's electrical
power, then plug it back in.
• If LED is not lit up, then try to unplug the unit's
electrical power, then plug it back in.
50
Registration
When the cordless handset lost its link with the
corded base during a call
• Check the power cord is connected properly into the
corded base.
• Check the power adapter is connected properly into
an electrical outlet.
• Move the cordless handset closer to the corded
base. It may be out of range.
• Reset the corded base by unplugging the unit's
electrical power. Wait for around 15 seconds and
plug it back in again. Allow up to one minute for the
cordless handset and the corded base to
synchronize.
Interference
Noise interference on your radio or television
Your corded base or cordless charger may be too close.
Move it as far away as possible.

Answering machine

Answering machine does not record messages
• Switch the answering machine on.
• The memory may be full. If so, you will need to
delete some messages.
Help