Motorola iDEN i50sx Owner's Manual page 12

PTT Switch Installation
1. Connect the PTT switch to the Junction Box (see figure 2, Junction
Box installation).
2. Run the cable to the desired location and utilize the Velco
to mount the PTT switch. For manual shift vehicles, the switch is
commonly attached to the gear shift.
Antenna Port Adapter Installation
Figure 8. Installing the Antenna Port Adapter
1. Carefully remove existing Escutcheon Label from the back of the
portable phone.
2. Peal the adhesive backer from the new Antenna Port Adapter and
place into the recess of the portable phone.
3. Secure into place by firmly pressing around perimeter and center of
newly placed Antenna Port Adapter.
12
Escutcheon Label Recess
CAR KIT OWNER'S MANUAL
fastener
TM
Antenna Port Adapter