6.10.3.1. Points in reassembly
WINDOW HOLDER A&B
1. Insert the 2 holders on the window holder A into the holes
on the window holder B assy. to install the window holder
A and the window holder B in the door assy.
6.10.4. Disassembling the power cord assy.
1. Cut the band out.
2. Remove the power cord assy. fasten terminal from the P.C. board unit.
3. Remove the power cord assy. from the frame R.
GLASS A&DOOR HONDLE
1. Adjust the clearance between the window holder plate B
and glass A, and install the door handle.
20