5.2.
Operation check test for the P.C. board (Do not turn on the power of the
heater during the check test.)
1.
• Set the power button to "ON".
2.
• Connect the power cord to the 120V.a.c. with the temperature key "
3.
• Display oder of "VinAD" in the Lcd display.
No.
Operation
1
• Set the power button to ON.
• Connect the power cord to the
120 V a.c outlet with the
temperature keys
"
" and timer keys "
pressed.
2
• Press the "Toast" key.
3
• Press the "Waffle / Frozen" key.
4
• Press the "Roll / Reheat" key.
Display and buzzer information
• The power lamp comes on.
• Display "Vin a.c oder" in LCD Dis-
play.
"
• The power lamp comes on.
• The buzzer sounds once when the
key is operated.
• The "Toast" lamp comes on.
• The power lamp comes on.
• The buzzer sounds once when the
key is operated.
• The "Waffle / Frozen" lamp comes
on.
• The power lamp comes on.
• The buzzer sounds once when the
key is operated.
• The "Roll / Reheat" lamp comes
on.
(up)" and the timer key "
Working description
Action
No power is supplied to the
heater.
10
(down)" pressed.
Items to be checked
Check if the mode changes to the
test one.
* The mode change was ended in
failure.
(Perform the operation of No.1
again.)