Installing And Connecting The Appliance; Drainage Connection; Drinking Water Connection - Siemens SE73HX42VE User Manual

en Installation and connection
¡ Operating instructions
¡ Installation Instructions
¡ Further information documents
¡ Installation material
¡ Steam guard plate
¡ Mains cable
¡ Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
"Follow the safety instructions."
1.
→ Page 4
"Follow the instructions for elec-
2.
trical connection." → Page 13
Check the Scope of supply and
3.
the condition of the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
"Install the drainage connection."
6.
→ Page 12
"Install the drinking water connec-
7.
tion." → Page 12
Connect the appliance to the
8.
power supply.
12

Drainage connection

Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the wastewater hose to
2.
the outlet connection of the siphon
using the enclosed parts.
When doing so, check that the
3.
wastewater hose is not kinked,
crushed or twisted.
Also check that there is no cover
4.
in the drainage system preventing
the wastewater from being dis-
charged.

Drinking water connection

Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡ If you are replacing the appliance,
you must use a new water supply
hose.
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the appliance to the drink-
2.
ing water connection using the en-
closed parts.
Observe the "Technical data"
→ Page 52.
When doing so, check that the
3.
drinking water connection is not
kinked, crushed or twisted.