Mitsubishi Electric WD-60737 Owner's Manual page 34

34
4. TV Menus
Adjust, continued
Picture+
PerfectColor
Using PerfectColor:
Highlight the PerfectColor™ icon and press ENTER to display the PerfectColor menu. Settings are
retained independently for each TV input.
Using PerfecTint (837 Series):
• To switch between PerfectColor™ and PerfecTint™ adjustments, highlight Adjust Mode and
press
• Press
• Press
• Press CANCEL to restore default settings.
• Press MENU to return to the main menu.
1.
Press
2. With
837 Series: Choose ADV1 (daytime settings) or ADV2 (nighttime settings)
3. Use
4.
Press
5. Use
6. Press
Advanced Picture adjustments will be in effect for the current input.
To use the custom Picture Mode at a later time
Press MENU and go to Adjust > Picture > Picture Mode and:
737 and C9 Series
• Select
your professional installer.
• Otherwise select
To return to the default values for Advanced Picture
Display the Picture+ > Advanced Picture menu and:
737 and C9 Series
Highlight RESET Pic Mode and press ENTER.
3D Mode 3D Mode
Glasses L-R
PerfectColor Sliders
PerfectTint Sliders
(837 series)
.
to move from one color bar to the next.
to change settings.
Advanced Picture allows you to save highly customized picture
Advanced
adjustments for each input. Mitsubishi recommends a profes-
Picture
sional installer make these adjustments.
MENU. Under Picture+, highlight the Advanced Picture icon and press ENTER.
Picture Mode highlighted, press ENTER to change from blank (undefined) to ADV.
to highlight an option you wish to change and press ENTER to see the adjustment display.
to change settings.
to navigate to additional options and press
MENU to return to the Advanced Picture menu. Press MENU to close the menu. The
SPECIAL if settings were saved by
ADV.
On, Off
Standard,
Reverse
Adjusts the saturation (intensity) of six colors for
the current image source.
Adjusts six hues for the current image source
to change settings.
837 Series
• Sele ct ISF Day or ISF Night if settings were
saved by your professional installer.
• Otherwise select
837 Series
1.
Highlight the
2. ighlight RESET Pic Mode and press ENTER.
H
Repeat this separately for both ADV1 and ADV2.
Use the On setting for video games and movies that require 3-D
glasses. This setting applies only to the current input.
Note: 3D options are available only for 1080p 60-Hz video
sources connected to an HDMI input.
Synchronizes the 3D glasses with the image on screen to provide
the best 3D effect. Try Reverse if Standard seems incorrect.
ADV1 or ADV2.
Advanced Picture mode to change.