Channelview Channel Listings; Redirecting Audio Output; Controlling A/V Receiver Sound Volume - Mitsubishi Electric WD-60737 Owner's Manual

22
3. Using TV Features

ChannelView Channel Listings

ChannelView. Programs for the tuned channel are
listed on right side of screen.
ChannelView™ shows memorized channels on the ANT
input. It displays channel names and program informa-
tion for digital channels as sent by broadcasters or your
local cable service provider (information may be incom-
plete). No program information is displayed for analog
channels.
Note: You must set the TV Clock (page 38) to receive
ChannelView listings for the current channel.
Using ChannelView
Feature
Receive updates for a
digital channel.
Display/hide ChannelView
listings from the ANT
input.
Scan channels one by one. Hold
Scan channels quickly.
Jump to listings for a spe-
cific channel.
See more of the program
description for the current
channel (if available).
Tune to the highlighted
channel.
Instructions
1. Press to
highlight a channel
number.
2. INFO key
Press the
(the screen may
briefly go blank).
GUIDE
or
Hold PAGE UP/PAGE DN
1. Enter the channel
number.
2. ENTER.
Press
INFO
ENTER

Redirecting Audio Output

Selecting an Audio Output Device
1.
Press MORE and then 9 (AUDIO).
2.
Press to show the Speakers option. The Speak-
ers option will display only if there is a recognized
audio device on an audio or HDMI output.
3.
to select either AV Receiver, Head-
Press
phones, or TV.
Disconnecting an Analog A/V Receiver
When you disconnect an analog A/V receiver, change
the Speakers setting to TV to hear sound from the TV
speakers. Change the setting using the remote con-
trol's MORE > 9 (AUDIO )key or the Adjust > Audio >
Speakers menu.
Controlling A/V Receiver Sound
Volume
Use one of the methods below to control sound volume from
an A/V receiver.
With a Standard TV Setup
• Recommended Method:
remote control for your A/V receiver and enable the
Audio Lock feature. See page 59.
• Program the TV's remote control for your A/V
receiver and set the TV remote control's mode to
AUDIO. Return the control mode to TV to control the
TV.
• Use the remote control that came with the A/V
receiver.
With HDMI Control (CEC-Enabled HDMI
A/V Receiver)
The TV's remote control may control some functions of
the A/V receiver. See Appendix C, "HDMI Control of
CEC Devices," page 67.
With NetCommand IR Control
837 Series. Set up NetCommand control of the A/V
receiver's volume functions in the Inputs > AVR menu.
The TV's remote will then control A/V receiver volume.
See page 52.
Program the TV's