Mitsubishi Electric FL7000LU User Manual page 25

Mitsubishi fl7000lu: user guide
Hide thumbs Also See for FL7000LU:
Table of Contents

Advertisement

Menu operation (continued)
3. FEATURE menu
opt.
FEATURE
ASPECT
PASSWORD
DISPLAY
FUNCTION
INPUT
MENU POSITION
1.
CINEMA MODE
?
VIDEO SIGNAL
SETUP
SCART INPUT
A
LANGUAGE
Ë
RESET ALL
ITEM
ASPECT
PASSWORD FUNCTION
MENU POSITION
CINEMA MODE
VIDEO SIGNAL
SETUP
SCART INPUT
LANGUAGE
RESET ALL
CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.
When SCART INPUT is set to ON, nothing is output to the external monitor.
When SCART INPUT is set to ON, normal computer signals aren't projected.
Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped
with the SCART terminal.
Some AV devices equipped with the SCART terminal aren't compatible with this projector.
AUTO
AUTO
AUTO
AUTO
OFF
English
OK
SETTING
AUTO
16:9 (FULL)
REAL
2 options
AUTO
FILM
VIDEO
8 options
AUTO
OFF
3.75% / 7.5%
ON / OFF
12 languages
OK
FUNCTION
Select to change the aspect ratio automatically depending on the input
signal. (Select this option for normal use.)
Select to project images in full size (1920 x 1080 pixels) irrespective of
type of input signal.
Select to project images in their original size as input.
Use to enable or cancel the password lock. See page 33 for details.
Use to change the position of the menu.
The fi lm mode will be automatically activated when a fi lm source signal is
input.
Select AUTO for normal use.
When fl icker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select either
FILM or VIDEO, which improves the symptom better.
Fixed to the fi lm mode.
The fi lm mode will not be activated.
When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn't displayed
correctly, select the desired video format manually.
Select to change the SETUP mode automatically.
Select to make black lighter.
Select to make black thicker.
When 7.5% is chosen, the brightness is decreased by the set-up can-
cel function for the U.S. Choose OFF when the image is dark.
Choose ON when connecting the projector with a device equipped with
the SCART terminal that can output RGB signal. SCART terminal is used
mainly in Europe. Choose OFF normally. (Available only for the input signal
from the COMPUTER/COMPONENT VIDEO IN 2 terminal.)
Use to select the language used in the menus.
Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.
EN-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fl7000uFl7000u

Table of Contents