Advertisement
Step 5
You will need
4 X Screws
8 x Screws
#9 × 38mm
M3.5 × 16mm
(H1)
(H9)
Attach 2x Door Side Panels Right (P6) onto 2x Base Panels Door (P7) and 4x Shelf Panels
Door (P8) with 4x Screws #9 × 38mm (H1) and 8x Screws M3.5 × 16mm (H9).
Tighten with a phillips head screwdriver.
Note : Please measure the screw s ze before using it.
Step 6
You will need
8 x Cam Nuts
Phillips Head
(H4)
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
Attach pre-assembled onto 2x Door Panels (P4).
Insert 8x Cam Nuts (H4) into holes on 2x Door Side Panels Le t (P5) and 2x Door
Side Panels Right (P6).
Turn the Cam Nuts clockwise with a phillips head screwdriver.
fantasticfurniture.com.au
Phillips Head
Screwdriver
(H4)
DETAIL A
(H1)
(H9)
(P6)
(P8)
(P8)
(P7)
(P5)
(P6)
DETAIL A
(H9)
(X2)
(P5)
(P8)
(P7)
(P4)
(X2)
Page 8
Advertisement
