Table of Contents
Advertisement
Quick Links
CONGRATULATIONS! The installation of an Amerex Industrial Dry Chemical Fire Suppression System is a
commendable step toward securing total fire protection for your industrial application. Suppression systems
OPERATION
MAINTENANCE MANUAL
Amerex Industrial Dry Chemical
Fire Suppression System
IS18ABC (18 lb. ABC) /
IS35ABC (35 lb. ABC) /
IS45ABC (45 lb. ABC) /
AMEREX CORPORATION
7595 Gadsden Highway
TRUSSVILLE, AL 35173-0081
Home Page:
Printed in U.S.A.
OWNER'S
AND
P/N 15064
MODELS
Manufactured by:
P.O. BOX 81
Phone: (205) 655-3271
Fax: (205) 655-3279
E-Mail:
amerex@usit.net
http://www.amerex-fire.com
October 23, 2001
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Amerex IS18ABC
Summary of Contents for Amerex IS18ABC
- Page 1 Fax: (205) 655-3279 E-Mail: amerex@usit.net Home Page: http://www.amerex-fire.com Printed in U.S.A. October 23, 2001 CONGRATULATIONS! The installation of an Amerex Industrial Dry Chemical Fire Suppression System is a commendable step toward securing total fire protection for your industrial application. Suppression systems...
- Page 2 (1) year from the date of purchase. During the warranty period, any defective part will be repaired or replaced (at Amerex option). This warranty is valid only if each system is installed, serviced, and maintained by an Amerex factory trained Authorized Distributor in strict accordance with Amerex Manual No.
- Page 3 Note: This system is made up of units tested within limitations contained in the detailed installation manual, p/n 15040. The system designer must be consulted whenever changes are planned for the system or area of protection. An authorized Amerex installer or system designer must be consulted after the system has discharged. IN CASE OF FIRE: To Manually Operate the Suppression System: 1) EVACUATE ALL NON-ESSENTIAL PERSONNEL.
- Page 4 ..INSURING DESIGN INTEGRITY: Your Amerex Industrial Suppression System has been expertly designed and installed by personnel certified in these operations. Never attempt to modify the suppression system in any way or relocate any components. Enlist the help of your Certified Amerex Systems Installer when modifications or repairs are required.
- Page 5 Make sure that your facility is equipped with sufficient portable extinguishers to suppress fires in areas not covered by the fixed nozzles of the industrial fire suppression system. Your Amerex Distributor can provide the proper size and type of portable extinguisher required.
- Page 6 tape tape -------------------------------------- ---------------------------------------- fold here ---------------------------------------------Tear or cut at perforations ---------------------------------------- │ RETURN MAIL INSTRUCTIONS: │ 1. Fill out the following page completely. │ 2. Tear off entire sheet along vertical perforation. Tear off this instruction tab along horizontal perforation. │...
- Page 7 WARRANTY REGISTRATION FORM In order that we may fulfill obligations of the warranty on this Amerex Industrial Fire Suppression System, please complete the information requested below and return within 15 days of installation of the system per instructions on the reverse side of this form.
Need help?
Do you have a question about the IS18ABC and is the answer not in the manual?
Questions and answers