Drainage - Miele W1213 Operating And Installation Instructions

Drainage

The 5 foot (1.5 m) drain hose may be
connected as follows:
1. Directly into a sink: hook the hose
over the edge of the sink and secure
it firmly (e.g. by tying the hose to the
water faucet).
2. To a stand pipe: place the drain
hose into a 1 ½" (4 cm) stand pipe
and secure it firmly.
3. To a floor drain: The machine is
equipped with an air gap /
anti-siphoning system so that no
minimum drain height is required.
^ The machine drains using a pump
with a maximum delivery height of
4 feet (1.2 m).
^ Make sure there are no kinks in the
drain hose.
If desired, the drain hose may be
extended to run a maximum of 16 feet
(4.9 m), as long as the 4 foot (1.2 m)
height is not exceeded. Hose
extensions are available from your
Miele dealer or Miele.
Plumbing
49