Summary of Contents for Trane Technologies BAYSTAT033AC
Page 1
Outdoor Thermostat Supplementary Heat Control Model Numbers: Used With: BAYSTAT033AC All TTA/TWA models SAFETY WARNING Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Introduction Read this manual thoroughly before operating or servicing this unit. WARNING Proper Field Wiring and Grounding Warnings, Cautions, and Notices Required! Safety advisories appear throughout this manual as Failure to follow code could result in death or serious required. Your personal safety and the proper operation of injury.
Trademarks All trademarks referenced in this document are the trademarks of their respective owners. Revision History Updated for Trane Technologies. ACC-SVN94B-EN...
Installation General Figure 1. BAYSTAT033AC wiring schematic The outdoor thermostat (ODT) is designed to turn "ON" the supplementary heater at a preselected outdoor temperature. The number and setting of the ODT is dependent on the heat loss of the structure, and capacity of the heating system installed.
Page 8
Trane and American Standard create comfortable, energy efficient indoor environments for commercial and residential applications. For more information, please visit trane.com or americanstandardair.com. Trane and American Standard have a policy of continuous product and product data improvement and reserve the right to change design and specifications without notice.
Need help?
Do you have a question about the BAYSTAT033AC and is the answer not in the manual?
Questions and answers