Replacing The Doors - Maytag MSB2654HE Use And Care Manual

Installation
Note
• For refrigerators in operation, shut off water before
removing water line from the door.
To Disconnect the Water Line:
• Push in white collar (A) and hold.
• Pull the door-side tube from the connector (B).
To Reconnect the Water Line:
• Firmly push tube
lines on the tube as a guide for full insertion.
• If tube end is damaged, cut off
reconnecting.
• If leaking occurs, reconnect the line.
3. Close doors.
4. Remove top hinge covers by
removing Phillips screws.
5. Unscrew 5 " hex head screws from
⁄
16
top hinges.
For water dispensing
models only:
• Do not remove screw
connecting green ground
wire.
5 " into the connector. Use
⁄
8
5 " before
⁄
8
B
A
6. For ice and water dispensing models only:
Detach main wire connector harness and red wire
harness.
• To detach main wire
harness, use a flat blade
tool or fingernail to press
junction point between two
connectors to release.
• To detach red wire harness,
press tab on underside of
connector to release.
7. Remove top hinges along with doors.
8. Remove bottom hinges with a

Replacing the Doors

• To replace the doors, follow the steps in Door and
Hinge Removal in reverse order.
IMPORTANT: If water line tube end is damaged, cut
off 5 " before reconnecting.
⁄
8
3 " hex head driver.
⁄
8
4