Technical Data - Dexter Laundry 800ETC1-20030.1 Instruction Manual

4. TECHNICAL DATA

FR
Nominal voltage
ES
Nominal frequency
Nominal power
PT
No load speed
Nominal mass of machine
IT
Max. operating mass of machine
Max. mass of workpiece
EL
Max. demensions of workpiece
Diameter of diamond cutting wheel
PL
Bore diameter of diamond cutting wheel
Max. cutting depth at 90º
UA
Max. cutting depth at 45º
RO Max. cutting length
Kip area mitre cut
EN
Protection class (SK)
Protection type
Note: Recommendation for the operator to wear hearing protection.
The machine is designed for operating in S1 mode (continuous operation) under 800W power and S2
mode (short-term operation) under 900W power. S2 mode means that you can operate the machine for
an uninterrupted period of 10 minutes at most with a nominal load after this period of time has
elapsed, you must switch o the appliance and allow it to cool down completely. Afterwards, it can be
used again for a maximum of 10 minutes.
Sound and vibration
The noise emission values were measured in accordance with EN 61029 and EN 12418.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
Note:
that the declared noise emission value(s) have been measured in accordance with a standard test
method and may be used for comparing one tool with another;
that the declared noise emission value(s) may also be used in a preliminary assessment of exposure.
Warning:
the noise emissions during actual use of the power tool can di er from the declared values depending
on the ways in which the tool is used especially what kind of workpiece is processed;
need to identify safety measures to protect the operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched o and when it is running idle in addition to the trigger time).
230 V~
50 Hz
S1: 800W; S2 : 900W 10min
3000 min -1
26.6 kg
45 kg
20 kg
520 X 400 x 10mm
200 mm
25.4 mm
30 mm
25 mm
520 mm
0-45°
I
IP54
75 dB(A)
4 dB(A)
89 dB(A)
4 dB(A)
127