Get Started; Pair The Headphones With Your Mobile Phone; Charge The Battery - Philips 1000 Series User Manual

3 Get started

Charge the battery

Note
• Before you use your headphones for the first
time, charge the battery for 2 hours for
optimum battery capacity and lifetime
• Use only the original USB charging cable to
avoid any damage
• Finish your call before charging the
headphones, as connecting the headphones
for charging will power the headphones of
Connect the supplied USB charging
cable to the charging slot on the
headphones and the charger/USB port
of a computer.
LED turns white during charging and
turns off when the headphones is fully
charged.
Tip
• Normally, a full charge takes 2 hours
Pair the headphones
with your mobile phone
Before you use the headphones with
your mobile phone for the first time, pair
it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 4 devices in the memory . If you
try to pair more than 4 devices , the
earliest paired device is replaced by the
new one.
1
Make sure that the headphones are
fully charged and turned off.
2
f Press and hold the on/off button
(>6s), blue and white LED flashes
alternately which means the head­
phones enter Bluetooth pairing
mode. The headphones remain in
pairing mode for 5 minutes.
3
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
4
Pair the headphones with the
mobile phone. For detailed infor­
mation, refer to the user manual of
your mobile phone.
Tip
• Enter the headset password "0000" (4 zeros) if
prompted. For those mobile phones featuring
Bluetooth 3.0 or higher, no need to enter a
password
5
EN