Table of Contents
Advertisement
en Basic settings
Basic setting
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows H:xx.
38
Display text Selection
Cn:00
Cn:00 - Cn:01
rc:01
rc:00 - rc:02
rE:
Start with
Y:ES
Confirm with
Description
Switch the wireless network
connection on or off.
Level "Cn:00" switches the
wireless network connection
off.
The basic setting "Wi-Fi" is
only available once the ap-
pliance is connected to the
Home Connect app.
→ "Home Connect ",
Page 39
Activate or deactivate
→ "Remote Start ",
Page 40.
The following settings are
possible:
¡ With the setting "rc:00",
the function is perman-
ently deactivated.
¡ With the setting "rc:01",
the function can be selec-
ted via the
→ "Activating Remote
Start ", Page 40
¡ With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 39
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
a The display shows
Press
3.
the display shows the required set-
ting.
Press
or
4.
display shows the right value.
button.
.
repeatedly until
repeatedly until the
Advertisement
Table of Contents
