Makita LS1013 Instruction Manual page 13

1
2
3
1. Center cover
2. Hex bolt
3. Socket wrench
4. Blade guard
1
2
5
1. Blade case
2. Arrow
3. Shaft lock
4. Hex bolt
5. Socket wrench
1 2 4
3
1. Hex bolt
2. Outer flange
3. Saw blade
4. Inner flange
5. Spindle
To remove the blade, use the socket wrench to loosen the
001532
hex bolt holding the center cover by turning it counterclock-
wise. Raise the blade guard and center cover.
4
Press the shaft lock to lock the spindle and use the socket
001533
wrench to loosen the hex bolt clockwise. Then remove the
hex bolt, outer flange and blade.
3
4
To install the blade, mount it carefully onto the spindle, mak-
001786
5
ing sure that the direction of the arrow on the surface of the
blade matches the direction of the arrow on the blade case.
Install the outer flange and hex bolt, and then use the socket
wrench to tighten the hex bolt (left-handed) securely counter-
clockwise while pressing the shaft lock.
13