Maintenance Schedule - Makita G1100 User Manual

G1100(US)_GU1835 2004.2.6 1:04 PM ページ12

8. MAINTENANCE SCHEDULE

MAINTENANCE, REPLACEMENT OR REPAIR OF THE EMISSION CONTROL DEVICES
AND SYSTEMS MAY BE PERFORMED BY ANY NON-ROAD ENGINE REPAIR
ESTABLISHMENT OR INDIVIDUAL.
DAILY INSPECTION
Before running the generator, check the following service items:
US
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
PERIODIC MAINTENANCE
GB
Periodic maintenance is vital to safe and efficient operation of your generator.
GB
Check the table below for periodic maintenance intervals.
GB
IT IS ALSO NECESSARY FOR THE USER OF THIS GENERATOR TO
CONDUCT THE MAINTENANCE AND ADJUSTMENTS ON THE EMISSION-
GB
RELATED PARTS LISTED BELOW TO KEEP THE EMISSION CONTROL
GB
SYSTEM EFFECTIVE.
The emission control system consists of the following parts :
(1) Carburetor and internal parts
(2) Cold start enrichment system,
if applicable
(3) Intake manifold, if applicable
(4) Air cleaner elements
The maintenance schedule indicated in the table is based on the normal generator operation. Should the
generator be operated in extremely dusty condition or in heavier loading condition, the maintenance intervals
must be shortened depending on the contamination of oil, clogging of filter elements, wear of parts, and so on.
12
Safe surroundings
Leakage of gasoline and engine oil
Enough clean engine oil
AC and DC terminals for damage
Enough gasoline
Excessive vibration,noise
Loose or broken bolts and nuts
Clean air cleaner element
(5) Spark plug
(6) Magneto or electronic ignition
system
(7) Spark advance/retard
system, if applicable
(8) Exhaust manifold, if
applicable
(9) Hoses, belts, connectors, and
assemblies