Henny Penny KFC KVE 07X Manual

Henny Penny KFC KVE 07X Manual

Hot oil will cause severe burns

Advertisement

Use the following information to solve errors:
• IS POT FILLED? error = If the vat is full, press the button to resume normal operation. If the vat is not
full, close the drain valve and open the fill valve, and then press the filter button to pump the oil from the
pan back into the vat.
• E-31 error or heating elements are up out of the oil = Heating elements have been left up during
maintenance filter. Lower heating elements.
• E-10 error or the high limit is tripped = Allow the fryer to cool for 15-20 minutes, and then reset the high
limit by pressing down and releasing the raised side of the switch, for the vat that is not operating. A single
reset switch is located behind the door of each well. If the high limit does not reset, call for service.
• E-15 error or the drain is open = Make sure the drain handle is completely closed.
• E-22 error or the fryer is not heating = The vat is unplugged or the circuit breaker is turned off.
Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405. These instructions are meant to be
guidelines, not complete operating instructions. Read and understand the complete operator's manual supplied with each unit.
FM06-075-A
KFC's Alert Guide
HOT OIL WILL CAUSE SEVERE BURNS.
06-01-18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KFC KVE 07X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Henny Penny KFC KVE 07X

  • Page 1 • E-22 error or the fryer is not heating = The vat is unplugged or the circuit breaker is turned off. Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405. These instructions are meant to be guidelines, not complete operating instructions.
  • Page 2 COOK (OPEN) position. CONFIRM. 确认 Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405. These instructions are meant to be guidelines, not complete operating instructions. Read and understand the complete operator’s manual supplied with each unit. FM06-074-A...
  • Page 3 Add or Change Menu Items 抛光 温度 抛光 信息 TEMP INFO POLISH POLISH 确认 HIDDEN CONFIRM Level 1 Press and hold the TEMP and INFO buttons simultaneously until LEVEL 1 and ENTER CODE displays. Type 1, 2, 3, 4. PRODUCT and SELECTN displays. Press the CONFIRM button.
  • Page 4 Add or Change Menu Items Level 2 Used to access Load Compensation, Load Compensation Reference, Full Heat and PC Factor. Press and hold the TEMP and INFO buttons simultaneously until LEVEL 2 and ENTER CODE displays. Type 1, 2, 3, 4. PRODUCT and SELECTN displays. Press the CONFIRM button.

Table of Contents