Makita 3706 Instruction Manual page 10

OPERATION
1
2
1. Thumb screw
2. Vacuum cover
OPERATION
1
2
3
1. Circular guide
2. Projections
3. Vacuum cover
1
4
5
2
3
1. Circular guide
2. Thumb screw
3. Vacuum cover
4. Loosen
5. Tighten
OPERATION
10
Vacuum cover
Cleaner operations can be performed by connecting the cut-
out tool to Makita vacuum cleaner or dust collector.
Installing vacuum cover
001636
Loosen the thumb screw and remove the shoe. Attach the
vacuum cover, and fasten it securely using the thumb screw.
Installing vacuum cover with circular guide
001637
Release the thumb screw which serves to secure the vac-
uum cover. Align the projections in the circular guide with the
grooves in the vacuum cover, and secure the vacuum cover
and circular guide using the thumb screw.
To adjust the cutting depth, proceed first by loosening the
001638
thumb screw and then by sliding the vacuum cover and circu-
lar guide together. After completion of the adjustment, tighten
the thumb screw securely.