Unitech RG630 Quick Start Manual

RG630 UHF RFID Gun Grip
Quick Start Guide
How to download RFID Reader App on EA630
Before starting to use UHF RFID gun grip, please go to the website :
https://www.ute.com/en/products/detail/RG630
Go to download section and click "RG630 SDK and programming
manual" RFID Reader.apk is in the compressed folder.
How to use RFID Reader App on EA630
1). Connect EA630 with the UHF RFID gun grip.
Turn on EA630 and tap on the App "RFID Reader".
2). Region: Please choose the region based on the country.
And then tap Connect to start.
Tag Operation
Package
Please make sure the following contents are in the
gun grip gift box. If something is missing or damaged,
please contact your unitech representative.




Note :
￭ The gun grip is applicable to the terminal with or without the
bumpers on. (Selected by gun grip P/N)
￭ Please make sure EA630 OS version requires MR2 or higher.
￭
To work UHF RFID gun grip properly, please make sure the
battery of EA630 should be 10% or more.
V1.1
Setting
Baudrate
RG630 UHF RFID gun grip
Wrist Strap
RFID Tags
Quick Start Guide
3). Choose Tap operation to switch the other read
mode. There are: READ, WRITE, LOCK, KILL and
LOCATE.