Customizing Your Map 410; Setup; Initialization; Enabling/Disabling The Nav Screens - Magellan Map 410 User Manual

CUSTOMIZING YOUR MAP 410

Setup

Setup allows you to initialize the receiver and set system
parameters to your preference.
From
any
screen.

Initialization

By initializing your receiver, you establish the initial
position for the receiver. This will enable the receiver to
search the sky for available satellites. You will need to
reinitialize if you have travelled more than 300 miles while
the receiver is turned off.
Refer to the Getting Started section for more details.

Enabling/Disabling the NAV Screens

You may find that you do not use one, or more, of the nine NAV screens
provided in the receiver. You have the option to disable NAV screens,
except for the SAT STATUS and POSITION screens.
From
any NAV
MENU
screen.
A pop-up
ENTER
menu will
MARK
appear.
46
Use UP/DOWN
ARROW KEYS to
MENU
highlight SETUP.
From
any NAV
MENU
screen.
Use UP/DOWN
ENTER
ARROW KEYS to
MARK
highlight INITIALIZE.
Use UP/DOWN
ARROW KEYS to
highlight SETUP.
Use UP/DOWN
ARROW KEYS to
highlight ON or OFF.
ENTER
MARK
Use UP/DOWN
ARROW KEYS to
highlight SETUP.
ENTER
MARK
Use UP/DOWN
ENTER
ARROW KEYS to
MARK
highlight NAV SCREENS.
You will be
ENTER
prompted for
MARK
each NAV screen.
Magellan MAP 410 GPS Receiver
MENU
COORD SYS
MAP DATUM
ELEV MODE
PROJECTION
TRIP RESET
WAYPOINTS
ROUTES
SETUP
SUN/MOON
FISH/HUNT
CONTRAST
ALARM/MSG
SETUP
INITIALIZE
NAV SCREENS
COORD SYSTEM
MAP DATUM
ELEV MODE
TIME FORMAT
NAV UNITS
TEMP UNITS
NORTH REF
LIGHT TIMER
BEEPER
PERSONALIZE
CLEAR MEMORY
NMEA
BAUD RATE
SIMULATE
WPT NAMES WPT NAMES WPT NAMES
NAV 1
OFF
OFF OFF OFF
ON
ON ON ON