1. Manuals
  2. Brands
  3. Car Keys Express Manuals
  4. Remote Control
  5. REPLACEMENT REMOTE
  6. User manual

Car Keys Express FDCRR-7010 - Replacement Remote Manual

Also See for REPLACEMENT REMOTE:

Advertisement

Table of Contents
Contents
Car Keys Express FDCRR-7010 - Replacement Remote Manual

COMPATIBILITY LOOKUP

COMPATIBILITY LOOKUP
MAKE/ MODEL YEARS PAIR CODE
FORD
C-Max 2013-2018 2
Crown Victoria 2000-2005 1
Crown Victoria 2006-2011 2
Edge 2007-2015 2
Escape 2001-2018 2
Escort 1998-2003 2
Expedition 2003-2017 2
Explorer 2000-2015 2
Explorer Sport 2000-2005 2
Five Hundred 2005-2007 2
Flex 2009-2017 2
Focus 2000-2006 3
Focus 2007 4
Focus 2010-2018 2
Freestar 2004-2007 2
Freestyle 2005-2007 2
Fusion 2006-2011 2
Mustang 2000-2009 2
Mustang 2010-2014 2
Taurus 1998-2009 2
Taurus 2008-2018 2
Taurus X 2008-2010 2
Thunderbird 2003-2005 2
Transit 2013-2014 2
Transit Connect 2016 2
Windstar 1999-2004 2
LINCOLN
Aviator 2003-2005 2
LS 2003-2006 2
MKS 2009-2012 2
MKX 2007-2010 2
MKZ 2007-2017 2
Navigator 2003-2017 2
Zephyr 2006 2
MERCURY
Cougar 1999-2002 5
Grand Marquis 1998-2005 1
Grand Marquis 2006-2011 2
Marauder 2003-2004 1
Mariner 2007-2011 2
Milan 2006-2011 2
Montego 2005-2007 2
Mountaineer 2002-2009 2
Tribute 2007-2011 2
Sable 2008-2009 2

PAIRING INSTRUCTIONS

Instructions have timing requirements. Waiting too long between steps may result in your vehicle's computer timing out, requiring you to start over. Once you begin the pairing procedure, be sure to move at a quick and even pace.

PAIR CODE 1

  1. Insert a working key into the ignition.
  2. Turn the ignition from OFF to RUN (without starting the engine) 4 times within 3 seconds, with the 4th time ending in RUN. The door locks will cycle to confirm pairing mode.
  3. Within 20 seconds, press any button on the first remote. The door locks will cycle to confirm pairing.
  4. Within 20 seconds press any button on the second remote. The door locks will cycle to confirm pairing.
  5. Repeat step 4 for any additional remotes.
  6. Turn the ignition to OFF.
  7. Test all remotes.

PAIR CODE 2

  1. Insert a working key into the ignition.
  2. Turn the ignition from OFF to RUN (without starting the engine) 8 times within 10 seconds, with the 8th time ending in RUN. The door locks will cycle to confirm pairing mode.
  3. Within 20 seconds, press any button on the first remote. The door locks will cycle to confirm pairing.
  4. Within 20 seconds, press any button on the second remote. The door locks will cycle to confirm pairing.
  5. Repeat step 4 for any additional remotes.
  6. Turn the ignition to OFF. Locks will again cycle to indicate the end of pairing mode.
  7. Test all remotes.

PAIR CODE 3

  1. Insert a working key into the ignition.
  2. Turn the ignition from OFF to RUN (without starting the engine) 4 times within 6 seconds.
  3. Turn the ignition OFF. The system will chime to confirm pairing mode.
  4. Within 20 seconds, press any button on the first remote. The system will chime once to confirm pairing.
  5. Within 20 seconds, press any button on the second remote. The system will chime once to confirm pairing.
  6. Repeat step 5 for any additional remotes.
  7. Turn ignition to RUN to exit programming mode.
  8. Test all remotes.

PAIR CODE 4

  1. Fasten all seat belts and close all doors.
  2. Insert a working key into the ignition.
  3. Turn the ignition from OFF to RUN (without starting the engine) 4 times within 6 seconds, with the 4th time ending in RUN.
  4. Turn the ignition to OFF. An acoustic signal will sound to confirm pairing mode.
  5. Within 10 seconds, press and hold any button on the first remote. Wait for an acoustic sound and warning lamp to flash (confirming pairing), then release the button.
  6. Wait 2 seconds, but within 10 seconds, repeat step 5 for any additional remotes.
  7. To exit pairing mode, turn the ignition to RUN or wait 10 seconds.
  8. Test all remotes.

PAIR CODE 5

  1. Insert a working key into the ignition.
  2. Turn the ignition from OFF to RUN (without starting the engine) 4 times within 6 seconds.
  3. Turn the ignition OFF. The LED in the clock/trip computer will light up continuously to confirm pairing mode.
  4. Within 20 seconds, press any button on the first remote. The LED in the clock will flash 4 times to confirm pairing.
  5. Within 20 seconds, press any button on the second remote. The LED in the clock will flash 4 times to confirm pairing.
  6. Repeat step 5 for any additional remotes.
  7. Turn the ignition to RUN. The LED will turn off to indicate end of pairing mode.
  8. Test all remotes.

FCC REGULATORY STATEMENT

FCC ID: 2AOKM-FD1
47 CFR §15.19(a)(3) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.

  1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
  2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

HELP

For help or assistance, please contact technical support at: 888-598-8910.

OTHER KEYS

Visit CarKeysExpress.com to find a variety of award-winning products, like Universal Car Keys, Universal Car Remotes, and OEM keys and remotes.

Replacing car keys is simple and affordable again.TM

12101 Sycamore Station Place Ste. 140 Louisville, KY 40299

© 2021 Car Keys Express

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Car Keys Express FDCRR-7010 - Replacement Remote Manual

Advertisement

Need help?

Need help?

Do you have a question about the REPLACEMENT REMOTE and is the answer not in the manual?

Questions and answers

Related Manuals for Car Keys Express REPLACEMENT REMOTE

Save Article as PDF

Table of Contents