Power Supply
The mainboard supports ATX power supply for the power system. Before inserting the power
supply connector, always make sure that all components are installed properly to ensure that no
damage will be caused. A 300W or above power supply is suggested.
ATX 20-Pin Power Connector: ATX1
This connector allows you to connect to an ATX power
supply. To connect to the ATX power supply, make sure
the plug of the power supply is inserted in the proper
orientation and the pins are aligned. Then push down
the power supply firmly into the connector.
ATX 12V Power Connector: JPW1
This 12V power connector is used to provide power to the CPU.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M,
1.44M and 2.88M floppy disk types.
Volt
N ot ch
1 2 V
5 V _ S B
P W _ O K
G N D
5 V
G N D
5 V
G N D
3 .3 V
3 .3 V
7
10 20
5 V
5 V
-5 V
G N D
G N D
G N D
P S _ ON
G N D
-1 2 V
3 .3 V
1
11
GND 12V
3
1
2
4
12V
GND