Load High Performance/Bios Setup Defaults - MSI K8MM-ILSR User Manual

MS-6741 Micro-ATX Mainboard

Load High Performance/BIOS Setup Defaults

The two options on the main menu allow users to restore all of the BIOS settings to
High Performance defaults or BIOS Setup defaults. The High Performance Defaults
are the values set by the mainboard manufacturer for the best system performance
but probably will cause a stability issue. The BIOS Setup Defaults are the default
values also set by the mainboard manufacturer for stable performance of the
mainboard.
When you select Load High Performance Defaults, a message as below appears:
Pressing 'Enter' loads the default BIOS values that enable the best system perform-
ance but may lead to a stability issue.
MSI Reminds You...
The option is for power or overclocking users only. Use of high
performance defaults will tighten most timings to increase the system
performance. Therefore, a high-end system configuration is a must,
which means you need high-quality VGA adapter, RAM and so on. We
don't recommend that users should apply the high perform-
ance defaults in their regular systems. Otherwise, the system
may become unstable or even crash. If the system crashes or hangs
after enabling the feature, please CLEAR CMOS DATA to resolve the
problem. For more information, refer to "Clear CMOS Jumper:JBAT1"
in Chapter 2.
When you select Load BIOS Setup Defaults, a message as below appears:
Pressing 'Enter' loads the default values that are factory settings for stable system
performance.
3-24