NEC LED-FC009i Installation And Maintenance Manual page 22
Led module
Table of Contents
(3) Check the evenness using a spirit level and the alignment bars together. Adjust the positions if required.
M10 screws
Wall mounted: Mounting bar installation (4 x 4 frame set)
4.4 Install the power bar
Remove the power bar cover and install the power bar using Power bar screw (M8) screws.
How to remove the power bar cover
Sliding the power bar cover for removing. Power bar cover can slide left or right.
English - 20
Table of Contents
Need help?
Do you have a question about the LED-FC009i and is the answer not in the manual?