Zone Alarm; Fish Alarm - Lowrance X-65 Installation And Operation Instructions Manual

the second "0" to a "1". Next, press the
right arrow key again and press the
down arrow key once. This changes
the "1" at the end of the number to a
"0". The depth now shows 10 feet.
Press the ENT key to accept this
setting. The X-65 returns to the alarms
menu, showing a shallow depth of 10
feet. Now you can activate the alarm
by highlighting the "Shallow Alm" label
and pressing the right arrow key.
With the shallow alarm set at ten feet, anytime the digital display goes
below ten feet, the shallow alarm sounds.
Set the deep alarm in the same manner. If the bottom depth reading goes
below the deep alarm setting, the deep alarm will sound.

ZONE ALARM

The zone alarm is triggered when any
echo passes inside the zone alarm
bar, shown on the right side of the
screen. To turn the zone alarm on,
highlight the "Zone Alarm" label on the
alarms menu, then press the right
arrow key. To adjust the zone alarm,
highlight the "Zone Adjust" label, then
press the right arrow key. A screen
similar to the one at right appears.
To adjust the top of the zone bar
higher or lower, press the up or down
arrow keys while the up and down
arrows are surrounding the "Upper Zone" on the screen as shown above.
To adjust the bottom of the zone bar, first press the right arrow key to move
the arrows to the "Lower Zone" on the screen, then use the up or down
arrow keys.
When the zone alarm is set, press the EXIT key to erase the menus.

FISH ALARM

Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D. feature. A different tone
21