Menus; Operation; Automatic - Lowrance X-45 Installation And Operation Instructions Manual

In the example shown at the bottom of the previous page, the range is from
0 to 60 feet and the bottom depth is 37.3 feet.
NOTE: Turning the X-45 off erases all user settings and it returns to the
system defaults. For example, if you turn the lights on, then turn the unit off,
the next time you turn the unit on, the lights will be off, since the default
setting for the lights is off.

MENUS

The X-45 uses menus to guide you through the unit's functions and
features. The menu key accesses these features, allowing you to custom-
ize the unit to your particular needs and water conditions. All you have to
do to leave one menu and enter another is press the menu key repeatedly.
If you ever get lost in the menus, simply press the ON/CLEAR key. This
clears the menus from the screen.
Menus change depending on the mode the unit is in. For example, if the
automatic mode is turned off, the sensitivity menu changes from "AUTO
SENS" to "MAN SENS." Other messages may appear in menu boxes or
new menus can appear, again depending on previous selections.
On the screen shown on the previous page, the lamp menu is showing.
Pressing the up arrow key while this menu is on the screen turns the back
lights on.

OPERATION

AUTOMATIC

When the X-45 is first turned on, the automatic feature is enabled. This
feature automatically adjusts the unit's range and sensitivity according to
water conditions. It always keeps the bottom depth displayed in the lower
portion of the screen.
To turn the automatic feature off, press the
menu key until the AUTO/MAN menu ap-
pears. Now press the down arrow key. This
highlights the letters "MAN." The unit is now
in the manual mode. Wait a few seconds and
the menu will scroll off the screen's left side.
Pressing the ON/CLEAR key also clears it.
To turn the automatic feature on again, repeat
the above steps, except this time press the up
arrow key.
7