Lowrance X-29 Installation And Operation Instructions Manual: Introduction; Specifications

Lowrance x-29 fish radar: operation instruction.
Hide thumbs

Advertisement

INTRODUCTION

Thank you for purchasing a Lowrance sonar. Your sonar unit is a high
quality unit designed for both professional and novice fishermen. All of our
sonars have an automatic feature that finds and displays the bottom, fish,
structure, and more! All you have to do is press the on key. However, if
you wish to fine tune the unit, all you have to do is press the menu key. This
series of sonar products has powerful features available through easy-to-
use menus.
To get started with your Lowrance unit, first read the installation section.
This is where it all begins. Improper installation can cause problems down
the road. After you've read the instructions, install the unit, then read the
rest of the manual. The more you know about your unit, the better it will
perform for you.
SPECIFICATIONS - All Units
Dimensions ....................... 5.9" W x 5.35" H x 3.4" D
Input Voltage .................... 10 - 15 vDC
Current Drain .................... 350 ma (lights off)
........................... 500 ma (lights on)
Transmitter
Frequency .......... 192 kHz
Output Power ..... 600 watts (peak-to-peak) (typical)
........................... 75 watts (RMS)
Display
........................... 128 pixels (H) x 65 pixels (W)
........................... Film Supertwist Liquid Crystal Display
The storage temperature for your unit is from -4 degrees to +167 degrees
Fahrenheit (-20 degrees to +75 degrees Celcius). Extended storage in tempera-
tures higher or lower than specified will damage the liquid crystal display in your
unit. This type of damage is not covered by the warranty. For more information,
contact the factory customer service department or your local service center.
5.9"
NOTICE!
1
3.4"

Advertisement

   Related Manuals for Lowrance X-29

This manual also for:

X-39, X-49

Comments to this Manuals

Symbols: 0
Latest comments: