Mini-Usb Cable And Microsd Card; Loading Files Onto Endura - Lowrance Endura Out&Back Operation Manual

Installing battery cover
1. Slide the cover at a slight angle to insert
tabs into slots at the bottom of battery
compartment.
2. Once the battery cover is in place, turn
the D-ring clockwise one-quarter turn.

Mini-USB Cable and microSD card

A mini USB cable is used to transfer data between
Endura and a computer.
The Micro SD slot is
located next to the mini-
USB port, under the
rubber weathercap, on the
bottom of the unit.
When installing a microSD card make sure the
card's label if facing the same direction as Endura's
display screen.
mini-USB microSD
5
GPX user files (trails, routes and waypoints) are
loaded onto Endura's internal memory using the
mini-USB cable. Accessory map files are stored on
microSD cards (sold separately).
Audio (MP3 or WMA), video (MPEG, AVI or
WMV) and picture (JPEG or BMP) files can be
stored internally or on microSD cards. (Audio and
video files can not be used on Out&Back).

Loading files onto Endura

When Endura is connected to your computer the
device will switch to PC mode and will show a PC
connect screen. Endura will appear on your computer
as "Endura" when using the mini-USB cable. When
a micro SD card is used, it will be shown on your PC
as "Endura SD Card."
Copy/paste or drag and drop the desired picture,
audio or video file onto the Endura directory on your
computer.
Headphone jack
Sierra and Safari have a 3.5mm
headphone jack on the side of the
unit, allowing you to listen to audio.
Basic Operation