Subscribe to Our Youtube Channel
Related Manuals for INNLED T4
Summary of Contents for INNLED T4
- Page 1 MANUAL T4 / T4X Serial numbers from : V1.2 A001547 - except A001563 et A001564...
- Page 2 « Dedicated to supporting a French industrial ecosystem, this product was developed and assembled by our team in our Montpellier workshop. Because we attach special importance to the feedback of our customers, we invite you to contact us for any comment or suggestion.
- Page 3 TABLE of contents Precautions for certificat of introduction and T4 - content and overview conformity assembly manual remote battery maintenance and mode controlling cleaning...
-
Page 4: Précautions D'emploi
Précautions d'emploi WARNING ! Read the precautions in this manual before installing, switching on, using or maintaining this product. The following symbols are used to identify important security information of the product. Warning ! Warning ! Warning ! Warning ! Warning ! High risk. - Page 5 For any questions about the safe handling of this product, contact your INNLED dealer or call for technical assistance from Monday to Friday from 9am to 6pm: +33 9500 508 78. Respect all local standards and regulations during the installation, when switching the product on for the first time.
- Page 6 Protection AGAINST BURNS AND FIRES Do not use the product if the ambient temperature (Ta) exceeds 40 ° C (104 ° F). The surface of the device can reach 65 ° C during use. Keep combustible and / or flammable materials away from the product. Do not stick filters, masks or any other material on the optical components.
- Page 7 certificatE OF CONFORMITY...
-
Page 8: Introduction And Overview
Introduction and overview The T4 is a battery-powered lighting mast, which includes 3 LEDs per spot and a choice of color temperatures : 3000K 4000K CCT Tunable white It is packaged by a sets of 2 or 3 - depending on the presence or not of extra extension tubes - in a case equipped with integrated chargers. -
Page 9: Standard Configuration
T4 - standard configuration controller Head with 4 spotlights Hermatwist® Li-Ion Battery Module (980mm) Hermalink® Intermediate Module (850mm) Open Base... - Page 10 (200mm and 500mm) as well as an extra ballast. Head with 4 spotlights Until 2022, the T4 + extensions + ballast was referenced as . The extensions and the ballast are now options of the T4 but the functionnalities and configuration possibilities are identical to Hermatwist®...
- Page 11 These two additional extensions allow 4 possible configurations : INCLINED Any other configuration, in particular >280 cm is STRICTLY PROHIBITED 1m60 2m15 2m30 2m80 STRAIGHT Any other configuration, in particular >280 cm is STRICTLY PROHIBITED 1m66 2m21 2m36 2m86...
- Page 12 T4 - contenT and assembly The transportation cases can contain either : > 2 x (T4 + 500mm ext. tube + 200mm ext. tube + ballast) > 3 x (Standard T4 = without ext. tubes or ballast) Options 3 or 3 Heads...
- Page 13 500MM ext. tube 200MM ext. tube CHARGERS The modular assembly of the T4 offers not only a straight or an inclined position but also a choice of 4 possible height configurations. The orientation of some modules (head + extension) changes, depending on the configuration you desire.
- Page 14 REMINDER The transportation cases can contain either : > 2 x (T4 + 500mm ext. tube + 200mm ext. tube + ballast) > 3 x (Standard T4 = without ext. tubes or ballast) MAST N°3 MAST N°2...
- Page 15 2m80 assemblY (WITH OPTION OF EXT. TUBES) HEAD Remember to turn the head module around 180° to obtain a straight mast. BatterY Module Any other configuration, in particular >280 cm is STRICTLY PROHIBITED. 850mm EXT. TUBE 500mm EXT. TUBE Remember to turn the first module around 180°...
- Page 16 Remember to turn the head module around 180° to obtain a straight mast. BatterY module 850mm EXT. TUBE Remember to turn the first module around 180° to obtain a straight mast. OPEN BASE 280 cm GAMME T4 © INNLED 2019...
- Page 17 2m15 assemblY (WITH OPTION OF EXT. TUBES) The 2.15m T4 can be mounted in low ceiling spaces in which the 2.30m T4 does not fit. head Remember to turn the head module around 180° to obtain a straight mast. Battery...
- Page 18 1m60 assembly (WITH OPTION OF EXT. TUBES) head Remember to turn the head module around 180° to obtain a straight mast. Battery module 200mm ext. tube GE 20 Remember to turn the first module around 180° to obtain a straight mast. open base 160 cm 215 cm...
- Page 19 manual mode : head overview controller Spotlight head Power button and MENU (1) This button is the unique interface with your product in Manual mode...
- Page 20 MANUAL MODE using your mast for the first time A short press on the button switches the mast on. A chase will then start on the spotlights indicating a standard test of the LEDs. > If a remote control or RF transmitter is detected the product will automatically connect to the RF frequency and can now be remote controlled from a distance.
- Page 21 MANUAL MODE changing the base colour of your mast The Base Colour is the colour temperature on which your mast switches on. This parameter is memorised in the mast even if the mast is not switched on or if the battery is not connected.
-
Page 22: Remote Controlling
2. From a console + HF transmitter (ref TA51) Note on TA51 transmitter. TA51 transmitters assign the DMX addresses of the T4 lighting masts via the ASSIGN menu. The T4 lighting masts have 5 DMX channels, the TA51 transmitter manages 512 DMX channels per universe. - Page 23 battery The battery module is equipped with 4 LEDs that indicate the charging status of the batteries in real time. d'ensemble The LEDs give different types of information. There are 2 modes: In use Charging jack button > with LEDs for indication of the battery status...
- Page 24 LEDS and state of charge 1. ACTIVE MODE : When the T4 is operating, it is possible to know the battery charging status. To do so, press the button, the LEDs will show you the status of the batteries according to the following diagram : <...
-
Page 25: Maintenance Et Nettoyage
Do not open the different modules of the product. Do not try to repair the device yourself, this could create a risk for safety or damage that would not be covered by the INNLED warranty. Any other intervention must be carried out by the INNLED After Sales Service. - Page 26 +339 500 508 78 sav@innled.fr Recycling of products INNLED products are supplied in compliance with Directive 20012/19 / EC of European Parliament and the Council of the European Union on the Reprocessing of Electrical and Electronic Equipment (WEEE) when applicable.
- Page 27 360 avenue des Compagnons 34170 Castelnau-le-Lez FRANCE contact@innled.fr www.innled.fr...
Need help?
Do you have a question about the T4 and is the answer not in the manual?
Questions and answers