Control Panel - Electrolux LUC4NE23X User Manual

4. CONTROL PANEL

4.1 Display
4
Temperature scale
1
Temperature key
2
ECO mode icon
3
FastFreeze icon
4
4.2 Switching on
1. Plug the appliance into electrical
mains socket.
2. To turn on the appliance, touch the
temperature key. All LED indicators
light up.
The temperature is set to the default
setting (ECO mode). LED indicator next
to ECO mode icon illuminates.
4.3 Switching off
1. To switch off the appliance press the
temperature key for 3 seconds.
All LED indicators turn off.
2. To disconnect the appliance from the
electrical supply, remove the mains
plug from the power socket.
4.4 Temperature regulation
To regulate the temperature, press the
temperature key. Every time the key is
pressed, the set temperature moves by
one position and corresponding LED
indicator lights up. Press the temperature
key repeatedly until the required
temperature is selected. The setting will
be fixed.
Selection is progressive,
varying from -15°C to -24°C.
Recommended setting is
-18°C. You can activate it
also by ECO mode.
1 2
3
The set temperature will be reached
within 24 hours. After a power failure the
set temperature remains stored.
4.5 ECO mode
In this mode the temperature is set to
-18°C.
This is the best setting to
ensure good food
preservation with minimal
energy consumption.
To activate ECO mode press the
temperature key repeatedly until LED
indicator next to ECO mode icon lights
up.
4.6 FastFreeze function
This function is used to perform pre-
freezing and fast freezing in sequence in
the freezer compartment. It accelerates
the freezing of fresh food and, at the
same time, protects food products
already stored in the compartment from
undesirable warming.
To freeze fresh food activate
the function at least 24 hours
before placing the food in
the compartment to
complete pre-freezing step.
To activate this function press the
temperature key repeatedly until the LED
indicator next to FastFreeze icon lights
up.
This function stops
automatically after 52 hours.
When the function
deactivates, the previous
temperature setting is
restored.
You can deactivate this
function at any time by
pressing the temperature
key and choosing a new
temperature setting.
ENGLISH 9