Advertisement
2．Replacement of Dust Proof Filter
2.1 Remove the dust proof filter from inside of dust proof cover.
2.2 In the reverse procedure of removal, mount the filter to dust proof cover so that its
3．Install the dust proof cover to front bezel.
5．Installation of Filter Monitoring Software
For the installation procedure of the Filter Monitoring Software, refer to
"FilterMonitorSoftware (for Windows) Instruction Guide" in the FilterMonitorSoftware (Windows) folder or
"FilterMonitorSoftware (for Linux) Instruction Guide" in the FilterMonitorSoftware (Linux) folder of the attached CD-ROM.
● If you are using Linux OS and the version of your EXPRESSBUILDER is earlier than
6.10-022.02, consult with your sales representative.
Remove the filter while holding the tab.
tab faces toward you.
Dust proof filter
23
Dust proof cover
②
①
Advertisement
Need help?
Do you have a question about the N8146-28 and is the answer not in the manual?
Questions and answers