Advertisement
Quick Links
Download this manual
See also:
Setup Manual
Lexmark™ C78x
Quick Reference
Loading paper and
specialty media
Loading 500-sheet trays
1
Remove the tray and place it on a flat, level
surface.
2
Squeeze the front guide lever and slide the
guide to the front of the tray.
3
Squeeze the side guide lever and slide the
guide to the correct position for the size paper
you are loading. Icons along the back of the tray
indicate paper sizes.
4
Flex the sheets back and forth to loosen them,
and then fan them. Do not fold or crease the
paper. Straighten the edges of the stack on a
level surface.
5
Place the paper in the tray as shown, print side
down.Do not load bent or wrinkled paper.
Maximum stack height
indicator
6
Squeeze the front guide lever and slide the
guide until it firmly touches the stack of paper.
7
Reinstall the tray.
8
Make sure the tray is pushed completely into
the printer.
Loading the 2000-sheet tray
1
Pull open the tray.
2
Squeeze the side guide lever, lift the guide, and
place it into the appropriate slot for the size
paper you are loading.
3
Squeeze the two front guide levers and slide the
guide to the correct position for the size paper
you are loading.
LT.LG
LT.LG
A5
A5
EX
EX
B5
B5
A4
A4
4
Slide the bottom support toward the front of the
tray until it touches the front guide.
5
Flex the sheets back and forth to loosen them,
and then fan them.
Do not fold or crease the paper. Straighten the
edges of the stack on a level surface.
6
Place the paper against the back left corner of
the tray, print side down.
Advertisement
Related Manuals for Lexmark C782dn
Summary of Contents for Lexmark C782dn
-
Page 1: Loading Paper And Specialty Media
Lexmark™ C78x Quick Reference Loading paper and specialty media Loading 500-sheet trays Remove the tray and place it on a flat, level surface. Squeeze the front guide lever and slide the guide to the front of the tray. Squeeze the side guide lever and slide the guide to the correct position for the size paper you are loading. -
Page 2: Setting The Paper Type And Paper Size
Open the multipurpose feeder. Squeeze the paper guide lever and slide the guide all the way toward the front of the printer. Flex the specialty media back and forth to loosen the stack, and then fan the stack. Do not fold or crease the media. -
Page 3: Printing A Document
Supported graphic types are .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx. For information regarding tested and approved USB flash memory devices, see the Lexmark Web site at www.lexmark.com. Make sure the printer is on and Ready or Busy appears. - Page 4 Pull the duplex tray E completely out. Remove any paper caught in the rollers or inside the printer. Reinstall the duplex mechanism in the printer. Area T<x> Carefully open trays 2 through 4 (all 500-sheet trays), and then remove jams.