5. Color Palette: Allows to you choose specific color of the LEDs.
6. LED Brightness Bar: Allows you to adjust the LED brightness.
7. Auto: LEDs will Automatically change the Color Palette and LED Brightness.
» » If you select Auto mode, the Color Pallette and LED Brightness Bar will disabled.
8. LED SPARKLE: Allows to you choose sparkle of the LEDs.
• Permanent: LEDs are constantly lit.
• Shine: LEDs flash at a specific frequency.
• Breath: LEDs gradually flash on and off.
• Shine & Music: LEDs will flash according the music played on your system.
» » Please make sure your speaker or earphone is properly connected to audio jack before using
SILVER LIGHTNING program.
• Meteor: LEDs slide at a specific frequency.
• Wave: LEDs are presented in a water wave rhythm.
• Starry sky: LEDs flicker at a specific rhythm.
• Lightning: LEDs flash and slide at a specific frequency.
• Rainbow: LEDs lights to dazzling colorful rhythm.
• Aurora: LEDs shows soft light and flickers lightly.
9. High/Low Speed Switch: Allows you to control the flicker speed.
Note
» » With VIVID LED DJ users can control the four LED light zones independently with different flashing
modes (LED SPARKLE).
36 | Chapter 3: UEFI BIOS & Software