Download Print this page

Copying Using The Adf; Copying Using The Scanner Glass; Making A Copy - Lexmark X644DTE Quick Reference Manual

Lexmark x644dte: reference guide

Advertisement

crease the print media. Straighten the edges on
a level surface.
5
Load the media in the tray.
Load paper or transparencies with the left
edge of the stack against the stack height
label and with the recommended print side
faceup.
Load envelopes flap side down with the
stamp area and flap on the left. The end of
the envelope with the stamp area enters the
multipurpose feeder first.
Warning:
Never use envelopes with stamps,
clasps, snaps, windows, coated
linings, or self-stick adhesives.
These envelopes may severely
damage the MFP.
Follow the illustrations for loading the paper
according to your options.
Simplex (single sided)
Duplex
6
Slide the side guide toward the inside of the tray
until it lightly rests against the edge of the
media.
7
Set the Paper Size and Paper Type for the
multipurpose feeder to the correct value for the
print media you loaded.
Closing the multipurpose feeder
1
Remove print media from the multipurpose
feeder.
2
Push the extension tray in.
3
Close the multipurpose feeder cover.
Copying

Making a copy

1
Place the original document face-up in the
automatic document feeder (ADF) or face-down
on the flatbed.
Adjust the paper guides when using the ADF.
2
Go on the numeric pad.
Note:
If an LDSS profile has been
installed, you may receive an error
when attempting a quick copy.
Contact your system support
person for access.

Copying using the ADF

1
Place the original document face-up in the
automatic document feeder. Adjust the paper
guides when using the ADF.
2
Touch Copy on the home screen, or use the
numeric keypad to specify the number of copies
you want.
After touching Copy or entering the number of
copies, the touch screen will automatically
change to the copy settings menu.
3
Change the copy options to meet your
requirements.
4
Touch Copy It.

Copying using the scanner glass

1
Open the document cover.
2
Place the document facedown on the scanner
glass.
3
Close the document cover.
4
Touch Copy on the home screen, or press Go
on the numeric pad.
For Copy, continue with step 5.
For Go, proceed with step 8.
5
Set the number of copies.
6
Change the copy options to meet your
requirements.
7
Touch Copy It.
8
Touch Scan Next if you have more pages to
scan, or touch Finish the Job if you are done.
Touching Finish the Job returns the printer to
the copy screen.

Advertisement

loading

This manual is also suitable for:

X644eX646dteX646eX646efX646